Seacon-compatible CS-MS Cable Plug (CCP) — 9 pin, size J, 9-pin, rated 600V / 10,000 psi. Full dimensional interchangeability with OEM CS-MS series connectors. Suitable for ROV, umbilical, and subsea instrument applications.
This CS-MS compatible cable plug (ccp) is engineered to the exact dimensional and electrical interface of the original CS-MS series connector platform — one of the most widely deployed subsea connector standards in the offshore industry. Designed for direct interchangeability, it can replace OEM units in existing systems without modification to mating hardware, cable terminations, or mounting structures.
The connector is specified with a size J, 9-pin and a 9-pin contact configuration, rated to 600V and 10,000 psi. Gold-plated contacts and a chemically resistant elastomer body ensure reliable sealing and low-resistance electrical performance across the full operating envelope.
CS-MS Compatible 9 Pin size J, 9-pin 600V 10,000 psi Drymate
| Parameter | Specification |
|---|---|
| Series Compatibility | CS-MS |
| Connector Type | Cable Plug (CCP) |
| Shell Description | size J, 9-pin |
| Number of Contacts | 9 |
| Voltage Rating | 600V |
| Pressure Rating | 10,000 psi |
| Mating Cycles | >500 |
| Contact Material | Gold-plated beryllium copper |
| Insert Material | Neoprene / chloroprene elastomer |
| Shell Material | Stainless steel AISI 316 (standard) |
| Operating Temperature | -40°C to +85°C |
Our CS-MS compatible connectors are manufactured to the OEM dimensional standard, verified against published mating interface specifications. This guarantees compatibility with existing mating halves in the field without the need for adaptor plates or re-cabling.
All elastomer compounds and contact alloys meet or exceed the specification requirements of the original series. Material certifications and dimensional compliance reports are available on request for customer qualification programmes.
The compatible range covers cable plug, bulkhead, flange, right-angle, dummy, and PBOF variants across multiple shell sizes — providing a one-stop source for complete subsystem wiring harnesses.
Stocked variants are available for rapid dispatch. Non-standard pigtail lengths and specialist materials are manufactured to order with confirmed lead times.
Our team provides dimensional drawings, test reports, and application engineering support to ensure the correct connector is selected and properly installed for each application.
Inspect all sealing surfaces and O-rings under magnification before assembly. Apply a thin, even film of silicone grease to O-ring grooves. Verify correct polarity and contact alignment using a continuity tester before deployment.
De-energise all circuits before mating or de-mating. Align the keying feature and apply steady, axial force. Thread the coupling ring by hand until fully engaged, then apply final tightening torque. Record mating cycle count on the maintenance log.
Immediately cap or mate with a dummy plug after recovery. Flush with fresh water and inspect for seal damage. Re-apply silicone grease to O-rings before re-use. Replace any damaged O-rings before the next dive.
Request a Quote — CS-MS Compatible Connectors
Cable Plug (CCP), 9 pin and full CS-MS compatible family available. Contact us for pricing, drawings, and custom configurations.
