PUR shielded servo cable 4×2.5mm² power + 2×(2×1.0mm²) individually screened feedback pairs. 0.6/1kV power, 300V signal. Class 6. For medium servo motors with brake and encoder feedback.
This medium-duty servo motor cable is designed for servo motors in the 1.5–7.5 kW range where 2.5 mm² power conductors are required, combined with two individually screened feedback pairs for encoder and brake signals. The 1.0 mm² feedback conductors provide lower resistance than 0.5 mm² pairs — beneficial for long cable runs where brake coil voltage drop must be minimised, and for encoder supply lines where supply accuracy affects encoder performance.
The two independently screened pairs allow the brake control pair and the encoder pair to each have their own dedicated screen — preventing brake switching transients from coupling into the encoder signal pair.
| Parameter | Value |
|---|---|
| Power Cores | 4×2.5 mm² Class 6 |
| Feedback Pairs | 2×(2×1.0 mm²) individually screened |
| Power Voltage | 0.6/1 kV |
| Signal Voltage | 300V |
| Overall Shield | Tinned Cu braid ≥85% |
| Sheath | PUR (black) |
| Flex Temp | −40°C to +80°C |
| Oil Resistance | Yes |
